General Finishes Water Based Stains have all the advantages of oil base stains: they spread easily, can be repaired, can be blended effortlessly, and have plenty of open time. The thicker formula allows controlled penetration, which will reduce blotching on softer woods such as Aspen, Pine and Maple.
$47.50
Description
General Finishes Wood Stains have all the advantages of oil base stains: they spread easily, can be repaired, can be blended effortlessly, and have plenty of open time. The thicker formula allows controlled penetration, which will reduce blotching on softer woods such as Aspen, Pine, and Maple.
High-quality pigments of General Finishes Wood Stains produce dark, uniform colors on hard-to-stain woods like maple and pine. Low odor, low VOC, water cleanup, and noncombustible, General Finishes Wood Stains provide workability similar to oil-based stains. Thin as desired with distilled water; start with 5%, adding up to 10% by volume.
- Recommended Accuspray HVLP atomizing sets : .043 -.051 tip and nozzle, No. 9 air cap.
- Recoat/Dry Time: 1-2 hours
- Coats Recommended: 1 coat of stain is recommended – no more than two. If you apply multiple coats, add 10-20% topcoat to the stain to lock the color down. The other option when applying 2-3 coats of stain is to apply one coat of shellac before applying top coat. Allow to dry overnight then apply High Performance.
- Cleanup: Soap and warm water
- Coverage Per Quart: 150 sq. ft/qt
- Recommended Use: Interior use only – wood applications
- Sealer: GF’s Natural Pre Stain conditioner is available but not required.
- General Finishes Wood Stains Topcoat Recommendation: High Performance
- VOC: <100 g/l (.83 lb/gal) VOC varies according to color.
