Home / Clear Topcoats and Primers / Conversion Varnish

Conversion Varnish

Enduro Conversion Varnish is the latest addition to our professional water based product line.

Includes NCO Catalyst

Size

Sheen

$112.25

Description

Enduro Conversion Varnish is the latest addition to our professional water based product line. It is a two component post catalyzed urethane topcoat suitable for bar tops and commercial applications where ultimate durability is necessary. General Finishes Conversion Varnish has a 6-8 hour pot life once catalyzed and can be re-coated in 1-2 hours.

Includes NCO Catalyst

  • Sanding: Sand bare wood to 220 grit. 
  • Additives: Extender, adds more open time. Accelerator, quickens dry time. Do not use Crosslinker use the correct NCO catalyst. 
  • Use: Interior and Exterior. 
  • Compatibility: Can be used over any GF water base Top Coat, Sanding Sealer, Wood Stains, Dye stains, RTM, Glazes, and Milk Paint 
  • Color: Clear 
  • Cure Time: 1 week 
  • Application: Spray only –  has excellent flow and level for heavy duty wear surfaces.
  • Coats: 3 coats, additional coats can be applied depending on use.
  • Recoat: 1-2 hours
  • Spray Tip Sizes: Tip sizes recommended: Compressed Air .040, HVLP-.043-.051, Airless .009-.013. Air caps should be medium size.
  • Cleanup: Soap and warm water
  • Coverage: 450-500 sq. ft/gal
  • Weight Solids: 28% VolumeSolids: 25.5%
  • Viscosity: 30-40 Seconds, Ford # 4 Pot Life: 6-8 Hours
  • VOC: < 195 g/l ( 1.63 lbs/gal.) Actual VOC < 65 g/l (0.45 lbs/gal.)